We’re continuing our 2019 Raptor bolt-on build series, and in this article, we’re going to give you a close-up look at the Fab Fours Vengeance Front Bumper and Rear Bumper. We’re going to talk about the features, and then we’ll be doing our installation guide article separately. You can shop for all the Fab Fours products and over a million top name brand products at Motoroso.com. Let’s get started.

BUY THE FAB FOURS VENGEANCE FRONT BUMPER HERE!!!

BUY THE FAB FOURS VENGEANCE REAR BUMPER HERE!!!

One thing to consider when you’re looking at an aftermarket bumper, especially one that’s as beefy as this Fab Fours bumper, is whether or not it sticks out further or has less ground clearance than your OEM bumper. This high and tight design from Fab Fours makes sure that you retain that angle of attack and you don’t go dragging your brand new bumper all over the trail. One last thing about the front bumper is if you have adaptive cruise control, this bumper will work, but you’ve got to make sure you buy the adaptive cruise control relocation bracket. Now let’s take a look at the rear bumper.

At the rear, the vengeance series maintains its sleek aggressive design. It is low profile and very pretty. It has all the mounting points for your reverse sensors and your seven-way connector. It comes with new license plate light, and it has a mounting point for a 6″ led light bar on each side, which you can wire into your reverse lights. This is also very light compared to your factory bumper, and it works with your OEM towing receiver hitch. It’s pretty straight forward and we’ll show you how to install this in our installation article. 

VIDEO: FRONT BUMPER INSTALLATION GUIDE FOR FORD RAPTOR

VIDEO: REAR BUMPER INSTALLATION GUIDE FOR FORD RAPTOR