By Here’s all the Brembo Brake Kit Options for the 2020+ C8 Corvette!
Whether you configure your new mid-engine Corvette with the base brakes, or the Z51 brakes, you might find yourself disappointed with the wimpy appearance and lack of braking performance on your new 2020+ C8, especially on the race track. New rotors and pads can help, but the best way to take your braking performance to the next level is through a full Big Brake Kit from the masters of braking technology… Brembo!
We made a separate Blog Post, and a full video covering the details of the GT System with the new BM6 “Alien Fist” caliper, We recommend watching that over here >>>>
In this post we’re going to cover all 39 of the front brake variations of the Brembo Systems for the new C8, and our spotlight video and blog post will help you figure out how to choose. At this time, there are newly available rear brake upgrade kits for the C8! Check out the complete kits on Motorso.com!
Brembo GT System with 350mm Rotor and Traditional M6 Caliper
The Brembo GT System with the 350mm rotor and M6 caliper is only available with Type III Rotors, but has four different color options, shown and linked below.
NOTE: These brake kits will NOT fit inside the OEM 19″ wheels, and will require an aftermarket wheel with adequate clearance. Here at Motoroso.com we’re happy to work with you to determine the fit of these brakes under your wheels, and we sell dozens of industry leading brands as well. If you’re working with someone else to fit your wheels, then you can download the cross-section schematic PDF for the 350mm system here and supply that to them for measurement.
TYPE III:
Brembo GT System with 380mm Rotor and Traditional M6 Caliper
The Brembo GT System with the 380mm rotor and M6 caliper are available with Drilled, Slotted, and Type III Rotors, and has four different color options shown and linked below.
NOTE: These brake kits will NOT fit inside the OEM 19″ wheels, and will require an aftermarket wheel with adequate clearance. Here at Motoroso.com we’re happy to work with you to determine the fit of these brakes under your wheels, and we sell dozens of industry leading brands as well. If you’re working with someone else to fit your wheels, then you can download the cross-section schematic PDF for the 380mm system here and supply that to them for measurement.
DRILLED:
SLOTTED:
TYPE III:
Brembo GT System with 380mm Rotor and “Alien Fist” BM6 Caliper
The newest technology in Brembo GT line of products is the Brembo GT System with the BM6 Caliper. It comes with 380mm rotors which are available with Drilled, Slotted, and Type III rotors, and come in five different colors shown and linked below.
NOTE: These brake kits will NOT fit inside the OEM 19″ wheels, and will require an aftermarket wheel with adequate clearance. Here at Motoroso.com, we’re happy to work with you to determine the fit of these brakes under your wheels, and we sell dozens of industry-leading brands as well. If you’re working with someone else to fit your wheels, then you can download the cross-section schematic PDF for the BM6 380mm system here and supply that to them for measurement.
BM6 GT System with DRILLED Rotors:
BM6 GT System with SLOTTED Rotors:
BM6 GT System with TYPE III Rotors
RED
**This is the system on our Corvette, and featured in our video.
NEW Brembo Rear GT System with 380mm Rotor and “Alien Fist” BM6 Caliper
Brembo has now come out with a massive upgrade to the stock rear brake system. The new rear GT system comes complete with the BM6 calipers in the same color options as the front system, as well as 380mm rotors that come in the three slot types for customizing your look or perfectly matching the front system.
CHECK OUT THE COMPLETE FRONT AND REAR KITS FOR THE C8!
Brembo GT-S System
For those looking planning to spend more time at the racetrack, consider the GT-S systems. For a very small upcharge these systems come with 2 small but important improvement to handle the heat and punishment generated by track use: A hard-anodized black coating, and steel pistons with recessed seals.
NOTE: These brake kits will NOT fit inside the OEM 19″ wheels, and will require an aftermarket wheel with adequate clearance. Here at Motoroso.com we’re happy to work with you to determine the fit of these brakes under your wheels, and we sell dozens of industry leading brands as well. If you’re working with someone else to fit your wheels, then you can download the cross-section schematic PDF for the 350mm system here and supply that to them for measurement.
Brembo GT-R System
For the most extreme track and racing duty, the GT-R systems feature Brembo’s full billet-machined monoblock nickel plated calipers, packed with all of the most advanced braking technology developed in Brembo’s motorsports development facility. These calipers are manufactured in a separate facility, specializing strictly in the most precise brakes on earth.
NOTE: These brake kits will NOT fit inside the OEM 19″ wheels, and will require an aftermarket wheel with adequate clearance. Here at Motoroso.com we’re happy to work with you to determine the fit of these brakes under your wheels, and we sell dozens of industry leading brands as well. If you’re working with someone else to fit your wheels, then you can download the cross-section schematic PDF for the 380mm system here and supply that to them for measurement.
DON’T WANT TO SPEND MONEY ON A BIG BRAKE KIT? CHECK OUT THESE ROTORS:
These GiroDisc Rotors are a great option for a quick improvement in braking performance without going to a big brake kit, or if you don’t mind having the patched-matched Type III rotors.
GiroDisc High-Performance 2-piece Slotted Rotors for C8 Corvette Z51 – FRONT
GiroDisc High-Performance 2-piece Slotted Rotors for C8 Corvette Z51 – REAR
GiroDisc High Performance 2-piece Slotted Rotors for C8 Corvette Z51 – FRONT & REAR SET
