By All the Bumper Options for the 2021+ New Ford Bronco
In this article, we’re going to be covering all the new aftermarket front and rear bumper options for the brand new Ford Bronco and there are a lot of options to talk about because we just got back from SEMA 2021 where there was over fifty amazing Bronco builds out there with products from over twenty different manufacturers that we are going to talk about in this article. That means we’re not going to be able to dive into extremely deep detail about every single product the way we normally do, but we will include links in the article to the products on our website where you can learn more and of course shop for them. You can always reach us toll-free at 1.833.MOTOROSO or on LiveChat at Motoroso.com.
Video: All Bumper Options for the New Ford Bronco
Things to Consider
When you are shopping for bumpers, there is a lot to consider because there are a lot of different features and options for how you configure these bumpers. First of all, you want to run a winch or not. Would you like a Prerunner bar, a big stinger bar, or no bar at all? Do you want D-Ring mounts? Are you planning on running LED lighting? Is it going to retain the OEM skid plate or do they offer an aftermarket skid plate that compliments the bumper? How wide do you want it? Do want the mid-width, fender-width, or do you want it to go beyond and line up with the wide fenders. Now does it flow enough air through to the intercooler which is really important on these turbo applications for the Bronco?
In the rear, will it clear the tow hitch receiver or will it work with the spare tire carrier you have chosen to run that will carry a big enough tire that you’re on? And will it work with the electronics package you have chosen? That means things like the parking sensors, adaptive cruise control, and the new Bronco 360 camera system.
We’re going to try and list off as many of these features for every one of these bumpers as we can, but in many cases, these were actually early prototypes of the final details of the product that may be still be getting worked out. By the time you read this article, whether it’s a month or a year, there will definitely be more information, so again, check out the links throughout the article or hit us up on LiveChat, or our toll-free line.
Inexpensive Ways to Add Protection
Before we talk about full bumper replacements, some of you might just want to protect the stock bumper or add some functionality. For that, Aries makes their full front bull bar which is $379 and an easy installation. Rough Country is making their nudge bar for only $279 and includes a spot to mount some LED lights. Rough Country is also making a winch mount for $309. These are inexpensive ways to protect your front bumper and add a little bit of functionality, but now, let’s talk about full bumper replacements.
Addictive Desert Designs
BOMBER FRONT BUMPER
Let’s start off first with the offerings from our friends over Addictive Desert Designs who always bring it to the table with the design. This Bomber bumper has, as usual, a very angular, very low profile, super-aggressive look, got lots of openings at the front that can fit up to three 6-inch round LED lights and still allow air to flow around and into that intercooler, as well as to two 2-inch LED lights in each corner. This is a low profile design, it is going to give you a high angle of attack and it can either work with the OEM skid plate with some modification, or you can get their aftermarket skid plate. Pricing is not official on this yet but we expect that to be somewhere in that $2,000 – $2,300 price point.
Shop the Bomber Front Bumper with RIGID Light Mounts Here!
Shop the Bomber Front Bumper with Baja Designs Light Mounts Here!
They are going to be making a version of this bumper that is winch compatible which will make it larger. While the non-winch version of their Bomber bumper has no obstruction of any of the cameras or sensors, this bumper with the winch might have a little bit of an obstruction, but everything should still work okay. Expect this to cost just a touch extra.
BOMBER REAR BUMPER
The Addictive Desert Designs Bomber Rear Bumper is a tight-fitting rear bumper designed with appearance in mind. This bumper is designed to complement the contours of the Bronco perfectly and retains the OEM tow hooks. On each side of the bumper, there are mounting points for a single cube light framed by satin black aluminum panels. The Bomber bumper also offers two heavily reinforced clevis mounts for attaching 3/4-inch D-Ring shackles for recovery options.
The Bomber Rear Bumper is constructed from plate steel with a black powder coating to handle the roughness of the trail and stand the test of time. It is also designed for high clearance for versatility offroad. The OEM parking sensors are incorporated into the Bomber bumper so you can retain them if your Bronco is equipped with those sensors. This Bumper is a simple bolt-on design and is completely manufactured in the USA.
ROCK FIGHTER FRONT BUMPER
The Addictive Desert Designs Rock Fighter Front Bumper is an off-road-ready bumper designed with heavy trail use in mind. This bumper offers high clearance and approach angles to match the off-road potential of the 2021 Ford Bronco. The Rock Fighter Front Bumper is equipped to house a center 20-inch LED light bar with two top light mounts for round lights on either side of the low profile top hoop and standard winch mount.
For added utility, this bumper retains the OEM parking sensors, and there is an adaptive cruise control relocation bracket that is sold separately. The Rock Fighter features an integrated bumper skid plate that has vents for maintaining airflow to the intercooler.
Addictive Desert Designs has also designed a 3/16-inch aluminum skid plate as an upgrade from the factory skid plate although the Rock Fighter bumper is engineered to work perfectly with the OEM skid plate.
The Rock Fighter front bumper also features two reinforced clevis mounts which allow for 3/4 -inch D-rings, that provide recovery options for when you get stuck in the sand, mud, or snow. Designed for off-road function and its aggressive styling, the Rock Fighter looks great with any style fender. As typical with Addictive Desert Designs, this bumper is fully bolt-on and made in America.
Shop the Rock Fighter Front Bumper Here!
ROCK FIGHTER REAR BUMPER
The Addictive Desert Designs Rock Fighter Rear Bumper is a modern, low-profile plate steel design that stays tight to the rear of the Bronco. The bumper also includes an integrated license plate mount which retains the OEM license plate light. You can also maintain the OEM parking sensors as the Rock Fighter Bumper has cutouts for the sensors, and plugs for Broncos without parking sensors. The Rock Fighter Rear Bumper is also designed to fit around the OEM hitch and trailer plug.
For those pushing the limits of offroad adventures this rear bumper also features two reinforced clevis mounts for ¾-inch D-rings that provide excellent recovery options when driving off-road. The bumper also provides clearance for up to a 37-inch spare tire, and Addictive Desert Designs includes a third brake light relocation bracket to fit around the larger tire size. As typical with Addictive Desert Designs, this bumper is fully bolt-on and made in America.
STEALTH FIGHTER FRONT BUMPER
The Addictive Desert Designs Stealth Fighter Front Bumper is a sleek, low-profile bumper with a center mount for a 30-inch light bar, as well as two LED cube mounts on either side of the bumper for a perfect mix of style and lighting utility. The lower panel of the bumper features vents to allow airflow into the intercooler, which is something particularly important for this boosted application. Due to its low-profile design, the Stealth Fighter front bumper has excellent ground clearance for offroad excursions in addition to maintaining the OEM parking sensors. The bumper does include plugs if your model is not equipped with parking sensors and the adaptive cruise control relocation bracket is available as well.
The Stealth Fighter front bumper also features two reinforced clevis mounts which allow for 3/4 -inch D-rings, that provide recovery options for when you get stuck in the sand, mud, or snow. As typical with Addictive Desert Designs, this bumper is fully bolt-on and made in America.
Addictive Desert Designs has also designed a 3/16-inch aluminum skid plate as an upgrade from the factory skid plate although the Stealth Fighter bumper is engineered to work perfectly with the OEM skid plate. This bumper is going to cost around $2,100.
STEALTH FIGHTER REAR BUMPER
The Addictive Desert Designs Stealth Fighter Rear Bumper is a modern, low-profile plate steel design that stays tight to the rear of the Bronco. The rear bumper features two mounting points for rear-facing cube lights to provide confidence when reversing at night or in the dark. The bumper also includes an integrated license plate mount which retains the OEM license plate light. You can also maintain the OEM parking sensors as the Stealth Fighter Bumper has cutouts for the sensors, and plugs for Broncos without parking sensors. The Stealth Fighter Rear Bumper is also designed to fit around the OEM hitch and trailer plug.
For those pushing the limits of offroad adventures this rear bumper also features two reinforced clevis mounts for ¾-inch D-rings that provide excellent recovery options when driving off-road. The bumper also provides clearance for up to a 37-inch spare tire, and Addictive Desert Designs includes a third brake light relocation bracket to fit around the larger tire size. As typical with Addictive Desert Designs, this bumper is fully bolt-on and made in America.
Fab Fours
VENGEANCE FRONT BUMPER
The Fab Fours Vengeance Series Front Bumper is a premium steel bumper that is engineered to be lightweight and offer a sleek and modern appearance to the front of your Bronco. For ruggedness, the bumper is constructed of 11 gauge steel with a 2-stage black powder coating. This bumper is also available with or without a Prerunner bar for added protection, but that one with the Prerunner bar is going to cost just a little more.
The Vengeance Front Bumper allows you to mount a center 20-inch LED light bar, as well as four, LED cube lights — two on either side of the bumper. The bumper is designed to be a high and tight bumper with lower cutouts to maintain airflow to the intercooler as well as provide greater tire clearance. The Vengeance Front Bumper is available with or without a pre-runner bar. This bumper is compatible with the OEM parking sensors. This bumper will set you back around $1,500.
Shop the Vengeance Front Bumper with Pre-Runner Bar Here!
Shop the Vengeance Front Bumper without Pre-Runner Bar Here!
VENGEANCE REAR BUMPER
The Fab Fours Vengeance Series Rear Bumper is a heavy-duty upgraded rear bumper that retains the OEM parking sensors, hitch, and tow wiring. This bumper also features two mounting locations for 3X3 LED cube lights for making backing up in the dark an easy task. The Vengeance Series Bumper is constructed of 12-gauge and ¼-inch steel with a black powder coat finish. This bumper is a simple bolt-on design and is made in the USA.
MATRIX FRONT BUMPER
The Matrix Series Front Bumper is a slim-fitting front bumper that retains the OEM parking sensors and adds winching capability to your Bronco. It features a center mounting space for a 20-inch single-row LED light bar and two mounting locations for 3X3 LED cube lights on both sides. This bumper is winch-ready and also features two ¾-inch D-ring mounts for versatile recovery options when offroad. It also has increased tire clearance so you can fit larger tire sizes or go with a more aggressive suspension setup. For additional front protection, these bumpers are available with a Prerunner bar, a full guard, or no guard at all. The Matrix Series Bumper is constructed of 3/16-inch steel with a black powder coat finish. This bumper is a simple bolt-on design and is made in the USA.
To match this Matrix series bumper, you would want to look for Fab Fours Premium rear bumper.
Shop the Matrix Front Bumper Here!
Shop the Matrix Front Bumper with Pre-Runner Guard Here!
Shop the Matrix Front Bumper with Full Guard Here!
STUBBY FRONT BUMPER
The Fab Fours Stubby Front Bumper is a great value bumper that comes in at only around $1,000. At this price, you can have a winch-ready bumper that can accommodate up to a 12,000 lb winch. The design of the stubby front bumper allows for maximum tire clearance, helpful for people looking to fit the largest wheels and tires possible on this application.
This bumper features two D-rings in addition to the winch for even more recovery options. For lighting, the Stubby Bumper offers spaces for six 3×3 LED pods or two LED pod lights and four 5.5″ round lights, giving you a variety of ways to run your lighting.
This bumper is made from 3/16th steel and is finished in a black powder coat for standing up to. the serious conditions of off-road performance. This bumper does not work with the plastic skid plate.
Shop the Stubby Front Bumper with No Guard Here!
Shop the Stubby Front Bumper with Pre-Runner Guard Here!
GRUMPER
As typical with Fab Fours, expect them to come out with their Grumper eventually — their super aggressive wild-looking design that we cannot wait to see what that looks like on a Bronco. They’re also probably going to come up with a bunch of other products like fenders and their 40’s with no lift design, keep a solid eye on Fab Fours and all the products that they are planning to come out with.
DV8
FS-15 FRONT BUMPER
The DV8 FS-15 Series Front Bumper is a modular winch-ready front bumper that can be either a mid-width bumper or a full-width bumper with the add-on side wings. This bumper is designed to accommodate up to a 12,000 lb winch and has two D-ring mounts for a variety of recovery options. At the center of the bumper, there is a mounting location for either a 20-inch dual row LED light bar, or six pod lights. The bull bar features adjustable light tabs which can be used to mount a 13-inch LED light bar above or below the bull bar.
Finished with a 2-stage black powder coating, this bumper is ready for offroad use and the punishment of the trail. This bumper is compatible with the OEM skid plate and also retains the OEM parking sensors. Sold separately for this bumper are DV8’s adaptive cruise control relocation bracket and full-width wings for getting the most out of the FS-15 Series bumper. This bumper is going to set you back around $1,300.
FS-15 REAR BUMPER
DV8 has also made a matching rear bumper which is very low-profile and has places to mount LED reverse lights as well as two D-rings. The bumper is designed to have such a low profile because they have also designed a spare tire carrier that can fit up to a massive 37” tire. This carrier is made of tubular steel, looks great, reinforces the door, and relocates the brake light to maintain all functionality in the rear.
OE PLUS SERIES FRONT BUMPER
The DV8 OE Plus Series Front Bumper is a low-profile bumper designed to fit as tight as the stock Bronco bumper, but with added functionality. This bumper works with the OEM parking sensors, 360 camera, and works with both the plastic and steel factory skid plate. This bumper has a center grille where a 20-inch LED light bar can be mounted as well as locations on both sides of the bumper where two 3×3 LED light pods can be mounted for a variety of lighting options. Although this bumper is not winch-compatible, it features two D-ring mounts for recovery options.
MTO SERIES WINCH FRONT BUMPER
The DV8 MTO Series Front Bumper is a winch-ready front bumper with integrated lighting mounts for versatility offroad. This bumper can accommodate up to a 12,000 lb winch and has reinforced D-ring mounts for a variety of recovery options. On each side of the bumper, there is one space for a 3×3 LED light cube, and the bumper can be paired with an optional bolt-on bull bar that can house a 13-inch LED light bar for even more lighting. If you do not want to run a winch, you can fit a 20-inch LED light bar behind the aluminum accent plate. Sold separately is DV8’s adaptive cruise control bracket which is needed to retain the function of the OEM adaptive cruise control.
Westin
PRO SERIES FRONT BUMPER
The Westin Pro Series front bumper is Westin’s top-of-the-line offering with maxed-out functionality. This bumper is constructed of heavy-duty 10-gauge and 4-gauge steel and finished with a textured black finish. This bumper can handle up to a 12,00lb winch and includes D-ring mounts for a variety of recovery options. For lighting, the bumper can accommodate two 6-inch LED lights and two 2×2 LED pods. It also has a skid plate integrated, so basically everything you would want in a bumper. This bumper is available with a large reinforced stinger bar that adds even more protection to the front of your bumper. This bumper is going to be priced at around $1,400 which is a great value for all that this bumper has to offer.
PRO SERIES REAR BUMPER
Westin did introduce a matching rear bumper for the Pro Series front bumper which features two 6-Inch LED reverse lights, D-ring mounts, and stepping pads on either end of the bumper for easier access to the roof. The bumper also has four mounting bolts both corners of the bumper winch might be used for adding a ladder, or a larger tire carrier.
PRO-MOD FRONT BUMPER
Westin also introduced their Pro-Mod bumper which is their modular design that helps it to have a little bit of a lower profile. This is not a winch-compatible bumper, but a nice big aggressive look and offers a little bit of functionality. The Pro-Mod front bumper features a single mount for a 20″ LED light bar as well as four corner round LED lights for a large array of lighting options. For recovery, this front bumper is equipped with two D-ring mounts, and also has an integrated skid plate. This bumper is going to set you back around $1,200.
Road Armor
STEALTH FRONT BUMPER
The Road Armor Stealth Front Bumper is designed to be a heavy-duty bumper with offroad utility. The Stealth Front Bumper is winch compatible and features mounts for attaching 3.4-inch D-Rings for a variety of recovery options. At the sides of the bumper, there are mounting points for two 3X3 LED light cubes.
The Stealth Front Bumper is constructed from 3/16-inch steel with a black powder coat finish. The OEM parking sensors are incorporated into the bumper so you can retain them if your Bronco is equipped with those sensors. This Bumper is a simple bolt-on design and is completely manufactured in the USA. This bumper is going to set you back around $1,800.
Warn
ELITE SERIES FRONT BUMPER
The WARN Elite Series Front Bumper is a welded, one-piece construction bumper that uses 3/16-inch steel for ultimate ruggedness and protection offroad. The WARN bumper features spaces for two round lights on either side of the bumper, as well as a standard winch mount that can fit up to a 12,000 lb winch for off-road utility.
The Elite Series Front Bumper is designed to provide generous tire clearance with compatibility for large wheel and tire setups. The bumper also features two eyelets for D-rings for added recovery options. The Elite front bumper is available with and without a welded steel Prerunner bar since the bar and the winch’s control pack blocks the forward-facing camera. Control box relocation hardware is available. The Warn Elite front bumper is priced at around $1,700.
ARB
ZENITH FRONT BUMPER
The ARB Zenith Front Bumper is a Non-Winch Bumper and is designed as a full bumper replacement with serious offroading in mind. The Zenith Front Bumper is a clean, low-profile modern design that complements the look of the 2021 Ford Bronco exceptionally. The ARB Zenith Front Bumper also accommodates the OEM parking sensors and adaptive cruise control for retaining the full functionality of the Bronco. The Zenith Front Bumper features an integrated LED light bar for adventures in the dark. For recovery options, the Zenith Front Bumper has twin jack points as well as rated recovery points.
There are two front bumper options for the Sasquatch and Non-Sasquatch Models since the Sasquatch has wider fender flares and wider tires. The wide bumper lines up with Sasquatch fender flares, and the narrow version lines up with the Non-Sasquatch fender flares. The Zenith front bumper is going to set you back at around $1,700.
Shop the Wide Body Zenith Front Bumper Here!
Shop the Narrow Body Zenith Front Bumper Here!
SUMMIT FRONT BUMPER
The ARB Summit Front Bumper is designed to be a full bumper replacement with off-roading in mind. The Summit Front Bumper is compatible with winches up to 10,000lbs and allows for the use of round fog lights for exceptional utility on 4WD adventures. The full-size bull bar and grille guard provides heavy-duty protection for the front of your Bronco, especially in harsh off-road conditions.
The bumper also features twin jack points and rated recovery points for a variety of recovery options if you get stuck in the mud, sand, or snow. The ARB Summit Front Bumper also accommodates the OEM parking sensors and adaptive cruise control for retaining the full functionality of the Bronco. The width of the Summit Bumper is designed to blend seamlessly into the Bronco’s design complementing both wide or narrow fender flares. The Summit front bumper is priced at around $1,700.
4WP Factory
4WP BRONCO FRONT BUMPER
Another common option on several builds just because they came to market quickly was the 4WP Factory. This bumper is a really cool tubular and sheet-style design that mixes Baja and traditional styling together. For lighting, the 4WP bumper features spaces for a single 6” LED light on either end, as well as two 3×3-inch, LED Cubes towards the center of the bumper. The 4WP bumper also includes an optional winch mount that can support a 12,000 lb winch, has two D-ring mounts, and features an optional skid plate. With all the options this setup is going to set you back upwards of about $2,000.
SVC Offroad
BAJA STYLE FRONT BUMPER
The SVC If you like a really aggressive, minimalist, low-profile, tubular, Baja style look, SVC Offroad has a winch-compatible and non-winch-compatible version of their Baja style bumper. This bumper is extremely low-profile and minimalist, and it doesn’t even appear to support the parking sensors. You can expect this to be priced around $1,500 without a winch mount and $1,900 for the winch-compatible version. We didn’t see a matching rear bumper for this.
Havoc Offroad
METAL MASHER
Havoc Offroad has introduced their Metal Master front bumper. This is a tubular, Baja-style, very low profile, high ground clearance bumper, and it has these nice-looking vented inserts. This bumper is not winch-compatible, but it will support a 20-inch light bar for helping with visibility on the trail. One thing it was definitely unique about this Metal Masher bumper is that they offer D-ring mount locations with three different positions depending on how you want that D-ring to hang. There is no pricing available for this one just yet.
STEEL BENDER
Havoc Offroad also introduced their Steel Bender bumper which is a more traditional style boxed-off looking bumper and it has a Prerunner bar, but it’s a pretty low profile PreRunner bar so it doesn’t interfere too much with the cameras and the sensors. This bumper has that same three-position D-ring mounting location which looks pretty cool, and it also features a spot for a 20-inch LED light bar. Havoc Offroad is making a matching rear Steel Bender bumper as well with a similar design to the front. It’s got D-ring mount locations and a spot for some reverse lights.
Icon Vehicle Dynamics
Better known for their suspension products, Icon Vehicle Dynamics has introduced their front and rear bumpers for the new Bronco. It is definitely a unique-looking bumper and we don’t know what to say about it other than it looks different from everything else that is out there. They did tell us that this is probably not the final design so there may be a lot of changes but currently, it will house a winch, has spots for 3-inch Cube lights on the front bumper, and the rear bumper has cutouts for their proprietary shaped rear reverse lights. Check this one out in the future, there could be a lot of developments here from Icon. They make amazing suspension products, so we would not be surprised if these bumpers turn out to be pretty legit.
AFN 4X4
Another great product came from AFN. This is a very nice-looking bumper with its riveted style trim plates around the LED light mounting points, and it does have a hidden winch mount. This bumper is heavy-duty — the skid plate looks like it’s almost ⅓-inch thick steel. Both the front and rear bumpers are finished with a black powder coating for extra protection. This bumper is going to set you back around $2,000.
They also make a matching rear bumper for $1,200. The rear bumper is going to include two D-ring mounts and features an integrated step for easier access to the top of your Bronco.
CrawlTek
CrawlTek has introduced a new front bumper that is very low profile but still integrates a winch. The winch mounts below the bumper very low down without sacrificing too much ground clearance. This thing is so low profile it’s going to have absolutely no interference whatsoever with any of the cameras, sensors, or the adaptive cruise control.
They also produced a matching rear bumper that also has a winch mount — this was the only Bronco that we saw at SEMA that had front and rear winches and we think that’s really awesome. And this rear bumper still maintains that very low profile design, so it’s not going to mess with any of the sensors. This combination of bumpers is going to give you a great angle of attack out of the trail. We don’t have any pricing available for these products yet, but we’re going to be keeping a real close eye on these as time goes on.
Expedition One
FRONT BUMPER
Expedition One has designed a front bumper for the new Bronco that is a winch-compatible bumper. This bumper can fit up to a 12,000 lb winch and features two D-ring mounts for a variety of recovery options. For lighting, the bumper has spaces for a single 4” round light on either side of the bumper. This bumper is able to retain the OEM parking sensors, and with the purchase of their relocation bracket, the collision sensor as well. Expedition One’s front bumper can also include their optional skid plate for an additional $130. The bumper is configurable with options like coat finish, hoop guard types, and skid plate options with a price that ranges from $1,500 to $2,300 depending on how you configure the bumper.
Shop the Expedition One Front Bumper with Pre-Runner Guard Here!
REAR BUMPER
Matching the styling of their front bumper, Expedition One has also designed a rear bumper with loads of functionality. Just like the front bumper, this bumper is constructed of 3/16” steel with a black powder coating for durability and maintains the functionality of OEM parking sensors. Not only does this bumper have two D-ring mounts which have been standard for many of the other options and LED lighting which has appeared in a few rear bumpers, but this rear bumper also features a swing-away rear tire carrier that is brilliantly engineered. The tire carrier can fit a massive 40” tire and is included with the rear bumper. The swing-away arm can also, instead of a spare, carry additional accessories for complete versatility for 4×4 adventures.
Hauk Offroad
If you’re looking for a really unique design, check out the bumper from Hawk. This thing reminds us of an armored vehicle — feels very much like it belongs in the military. It also has all the features you would be looking for. It’s got a winch mount, and places for LED lights and D-rings. The bumper also has a Prerunner bar for added protection in the front.
The rear bumper of course matches and they built in a spare tire carrier that can support up to a 40” tire similar in design to the Expedition One’s tire carrier. It’s got a big box metal construction and has the same round light mounts as the front.
Bodyguard
BASE AND BAJA FRONT BUMPER
Another very unique product comes from Bodyguard. They’ve got this really angular aggressive look with vents and exposed silver studs to make the whole thing look different from just about anything else that we saw. With the Baja style bumper, there is an additional Pre-Runner style bar that has a mount option for a single row 20” LED light bar for enhanced nighttime visibility. This winch does accommodate a winch, an upper LED light bar that is integrated into the Prerunner bar (if you have it), and has two, corner LED Pods on each side of the bumper. This bumper is going to set you back around $2,300 and you can get the matching rear bumper for around $1,400. Both the front and rear bumper maintains the OEM parking sensors.
BAJA REAR BUMPER
The Bodyguard Rear Bumper is a low-profile bumper designed to maintain the usability of the stock rear bumper while providing additional features through lighting versatility and strength. The bumper is constructed of 10-gauge steel designed to accommodate the factory hitch and trailer plug. This bumper features mounting locations for ¾-inch D-rings for a variety of recovery options during offroad adventures. On either side of the rear bumper, there are spaces for a single RIGID LED light cube and the bumper also retains the OEM parking sensors for making reversing a breeze. All of Bodyguard’s bumpers are designed and manufactured in the USA.
Baja Forged
Several builds at SEMA featured the new bumper from Baja Forged. As the name suggests, it is a very Baja-styled bumper, and they just pull off making these bumpers look really crisp and clean. The lines that they follow and the nice steel plates that they insert into the bumper give it a really nice refined look, more so than some of the other minimalistic-looking Baja-styled bumper. The front bumper is going to accommodate a winch and has D-ring mounts like many of the other bumpers we have mentioned. The front bumper has a beautiful skid plate, and a rear bumper to match. Both the front and rear do have locations to mount LED Light cubes, so you can add those for extra off-road utility.
MaxliderBros
FRONT BUMPER
The Maxlider Front Modular Bumper is an interesting choice for a front bumper as it shares a similar profile to the Addictive Desert Designs Stealth Fighter Front Bumper and is actually built by Addictive Desert Designs as well. This bumper is constructed of powder-coated steel to handle the conditions of offroad adventures. An under-bumper aluminum skid plate comes standard with the bumper, and there is an option to incorporate a full-sized grill guard for even more protection. It is also winched compatible and features a bumper cover plate for those who do not plan on running a winch to maintain a clean bumper surface. For lighting, there are mounts for two LED cube lights on each side of the bumper. Although this bumper will interfere with the adaptive cruise control sensor, the bumper includes a relocation bracket to maintain all functionality. Like its ADD counterpart, it does maintain all parking sensors as well.
Fun-Haver
FRONT BUMPER
The Fun-Haver series of bumpers is a quite unique offering for the Bronco. This front bumper is a modular styled bumper designed for high clearance giving your Bronco a better approach angle. With the modular design, you can add an optional winch and lighting for customizing your setup to match your needs. For lighting, there are spaces on either side of the bumper for single LED cube light.
REAR BUMPER
Just like the front bumper, the rear bumper from Fun-Haver is designed to provide high clearance for offroading and features D-ring mounts and reverse lights for additional recovery and utility options. The rear bumper has a very simplistic design, with nice clean edges, very similar to the Havoc Offroad rear Steel Bender bumper. There is no pricing on this bumper just yet.
Closing Remarks
As you can see, there are a ton of bumper options already available in the aftermarket for this new Ford Bronco, so we hope this article helped you get the information you need to find the right bumper for your needs. No matter which bumper you choose you’re going to need to install it, and we’re going to make a video to show you how to do that soon. If you have any questions about any of these bumpers call us toll-free at 833.MOTOROSO or on LiveChat at Motoroso.com.
If you are enjoying the content we’re making for this exciting new vehicle, consider subscribing to our YouTube channel, where we are releasing videos covering all sorts of topics about the Bronco. In the meantime, check out our video on all the suspension options available for the new Bronco below, where we dive into everything you need to know to hit the trail hard with the suspension to match the level of adventure you’re taking your Bronco on. Thanks for reading!
