Lift Kit-Suspension w/Shock

Suspension Lift Kit w/Shocks

Suspension Lift Kit w/Shocks; 7 in. Lift; Incl. Front Spindles w/Brake Lines/Coils/MaxTrac Shocks; Rear Coils/Spacers/Track Bar Bracket/Sway Bar Extensions/MaxTrac Shocks;

• Lift/Drop Height: 7 in.

• Comes With DOT Approved Extended Brake Lines
• 17 in. Wheel With 5.5 in. Backspacing Or Less
• Will Clear 37 in. Tire
• Backed By A Limited Lifetime Warranty

The Maxtrac Suspension 7-inch lift for the Ram 1500 is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. We then replace the factory coil spring with a lifted coil spring and Maxtrac twin-tube shock to complete the front lift. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The spindles come with extended, DOT compliant, stainless steel braided brake lines. The rear lift comes with Maxtrac twin-tube shocks, rear coils, track bar/swaybar brackets. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.

Maxtrac Suspension was founded in November 2010, right in the midst of America's recession. We decided with the experience and knowledge that the team had built up over the years, we could build something that was a little more than a hole-in-the-wall generic parts dealer. We had the ability to bring price-competitive suspension components to the market, while still providing top notch quality on everything we make here in house at our facility in Anaheim, CA. We find ourselves among the very very few manufacturers that are able to provide all 3 types of suspension modifications on the market; lowering, leveling, and lifting. Our large line of lowered and lifted knuckles / spindles provide the cornerstone to many of our kits, providing true stock ride quality and comfort. With these ultra-durable, bulletproof products, it allows you to get any height you want from 3-7inches, depending on what you want to throw in the mix. While leveling kits have been on the market for a while, we feel ours are of significant quality to boast about. Maxtrac Suspension manufacturers all of our strut spacer leveling kits here in house, by hand. The kits are powder coated down the street, and boxed ready for shipment in our warehouse. This aligns with our dedication to top quality parts that you can trust, and keeping the parts at a price you can afford.