Intake Manifold

Victor Glidden Intake Manifold

Victor Glidden Intake Manifold; Spider Type; 5000-8500rpm; For 15/18 Deg. Heads; Non-EGR; Designed For 375 cid-Up Chevy Small Block High Output Drag Race Engines;

• Cylinder Head Type: Edelbrock 18 Degree
• Emission: Without EGR
• Engine Make/Size: Chevy Small Block (262-400)
• Number of Carbs: One
• Position: N/A
• RPM Range: 4500-8500
• Usage: Racing
• WARNING CA Proposition 65: Yes
• WARNING CA Proposition 65 Message: WARNING: This product can expose you to Lead; which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information; visit www.P65warnings.ca.gov.

• Spider Only - Must Match with Base PN[2992]
• For 5000 to 8500 RPM High-Performance Engines
• Designed with Drag Racer Billy Glidden
• Uses Large 3.6 sq in. Runners
• Use with 15-Degree or 18-Degree Heads
• Carburetor Mounting Flange For 4500-Series Carb

Intended for 375 c.i. and up high output drag race engines, this manifold was developed in conjunction with noted drag racer Billy Glidden and is specifically designed to complement the flow characteristics of fully ported 18 and 15 cylinder heads. It features a 4500 series carb flange, and the dividers are pulled back to increase plenum size and shorten the runners for improved high rpm performance. The runners are wider at the plenum, producing approximately 3.6 square inches area at the opening. Installation Notes: Must be used with Edelbrock base plate #2992. Recommended intake gasket: Edelbrock #7218 or Fel-Pro #1282 (spider and manifold), #1254 (base).

When you design and sell the best-engineered performance products in the world, you have to have a rigorous testing program. Why? Without adequate testing, there's no way to stand behind your product with confidence. That's why every product we design and sell at Edelbrock is tested and approved by Edelbrock engineers in a real world environment on state-of-the-art equipment. Our three Super Flow computerized engine dynos are capable of measuring 11 separate engine variables up to speeds of 12,000 rpm. For 2007, we added a new Super Flow SF902 engine dyno. It's fully automated and programmable to simulate various driving situations, and is equipped with WinDyn software for the very latest in testing equipment. For real-world tuning, there's our Super Flow model SF-840 eddy-current chassis dyno that can handle up to 1,000 hp at the wheels and speeds of 200 mph. When all testing is completed, the results evaluated, and the part has passed all performance criteria, then, and only then, is the product deemed ready for production. These precise testing procedures are applied to the entire Edelbrock line for performance that's guaranteed. Edelbrock test vehicles are driven by Edelbrock engineers and employees to get a "real world" feeling for the performance improvements. Our products are also tested and used by professional race car teams and drivers. Working with these talented individuals is just another extension of our research and development process so when we say "proven performance" we really mean it! Top racing teams in all forms of motorsports rely on Edelbrock to produce parts that they can count on to win races and championships. Further underscoring our commitment to the racing community, Edelbrock is the only aftermarket intake manifold manufacturer licensed by NASCAR.