When selecting one of K&Ns universal round straight air filters, you should consider the following dimensions as they relate to the specification chart:. Mounting Flange Inside Diameter - This is the most critical dimension and should be very close to the diameter of the applications inlet flange. The flange will stretch up to 1/8in. for those in between sizes.. Filter Diameter - This is the overall diameter of the filter. Always use the largest diameter practical to insure maximum filtration.. Filter Length - This dimension is the length of the filter body only, it does not include the flange length. Always use the longest filter practical for maximum filtration.. Flange Angle and/or Length - If no angle is listed in the specifications table, the flange is straight.. Any angle listed is in degrees and can be utilized when space is a problem.. Flange Type - The location of the flange in relation to the O.D. of the filter is sometimes offset to one edge of the filter for more clearance in an application.. K and N Universal Round Straight Sold Individually . These filters are legal ONLY for racing vehicles. Not applicable, nor intended for use on emission controlled street or highway vehicles. Mounting Flange Inside Diameter 1 1/2in. MM 38, Filter Outside Diameter 3in. MM 76, Filter Length 4in. MM 102, Flange Length 5/8in. Flange Type Centered


Honda ATC185 1980
Honda ATC185S 1981-1982
Honda ATC200 1981

Warning: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Manufacturer's Part Number	RU-0160
CARB Approved	No