Brake Residual Pressure Valve

Brake Residual Valve

Brake Residual Valve; 2 lbs. Pressure; For Use w/Disc Brakes; Polished;

• WARNING CA Proposition 65: Yes
• WARNING CA Proposition 65 Message: WARNING: This product can expose you to Lead; which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information; visit www.P65warnings.ca.gov.

• Eliminates Spongy-Pedal Feel
• Retains Brake Line Pressure
• Stops Brake Fluid From Draining Into Master Cyl.
• Brake System Stays Primed w/o Brake Drag
• Results In Firmer Pedal That Engages Quicker
• Provides Increased Braking Response

Russell brake residual valves eliminate spongy-pedal feel by retaining brake-line pressure and keeping your pedal firm. The valve stops brake fluid from draining back into the master cylinder; this keeps your caliper pistons and brake shoes from fully retracting so your brake system stays primed without brake drag. The result is a firmer pedal that engages quicker and provides increased braking response. These residual valves are polished for great looks and available in 2 psi for disc brakes & 10 psi for drum brakes; drums require more pressure to compensate for return spring tension.

Edelbrock Corporation has six locations: four in Torrance and two in San Jacinto, California, totaling over 600,000 square feet. Headquarters include: R&D; manufacturing; tech support and more. Less than a mile away the Exhaust and Suspension Division design and manufacture high quality components using custom built equipment and state-of-the-art testing facilities. Our Aluminum Foundry and Motorcycle Division, where we manufacture carburetors for motorcycles, is located in San Jacinto. Our sand-cast foundry has been called "the most state-of-the-art foundry west of the Mississippi." In 2007 we will be adding a new Permanent Mold and Heat Treat facility next to our existing sand cast foundry, an over 8 million dollar commitment to "Made in USA" products and performance. In October 1999, we moved our warehouse into a new Distribution Center. All shipping and receiving operations were relocated to provide room for the expansion of our cylinder head, water pump and manifold manufacturing area at the main facility. Vic's Garage is located in the Distribution Center and houses the Company's collection of street rods and classic cars, as well as our extensive collection of historic photos and archives. Please call and make an appointment if you would like to tour Vic's Garage. Russell Performance Products became part of the Edelbrock family early in 2001. They were moved to the shock facility in the spring and we are pleased to welcome the Russell employees to "The Fun Team." Into the Future, "Proven Performance" is the philosophy that began with Vic Sr. in 1938 and it continues today with the same high standards of performance and quality. Vic Sr. would be proud of what has grown out of his small garage in Los Angeles, California.