Tap to Call 1.833.MOTOROSO
Add Vehicle To Confirm Fitment:

Borla 11751 Axle-Back Exhaust System Fits 05-09 Mustang

MPN: 11751

Borla 11751 Axle-Back Exhaust System Fits 05-09 Mustang

MPN: 11751

Motoroso
Sold By:
Motoroso
  • Axle-Back Exhaust System
  • 2.5 in.
  • Incl. Mufflers/Hardware/4 in. Round x 12 in. Long Single Rolled Angle-Cut Tip
  • Right Rear Exit

$461.99 MSRP

$455.99

In Stock
Only 4 left in stock
Free Shipping!

Exhaust System Kit

Axle-Back Exhaust System

Axle-Back Exhaust System; 2.5 in.; Incl. Mufflers/Hardware/4 in. Round x 12 in. Long Single Rolled Angle-Cut Tip; Right Rear Exit;


SPECIFICATIONS:
  • Exhaust Type: Single
  • Exit Position: Rear
  • Exit Style: Straight
  • Inlet Inside Diameter: 2.500 in.
  • Material: T-304 Stainless Steel
  • Muffler Type: Turbo
  • Outlet Outside Diameter: 2.500 in.
  • System Type: Axle Back
  • Tail Pipe Diameter: 2.500 in.
  • Tail Pipe Material: Stainless Steel
  • Tip Diameter: 4.000 in.
  • Tubing Diameter: 2.500 in.
  • WARNING CA Proposition 65: Yes
  • WARNING CA Proposition 65 Message: WARNING: This product in the physical form it is sold does not present a hazard. However; operations including; but not limited to welding; brazing; or thermal cutting can expose you to chemicals including Chromium; Nickel; Cobalt; Arsenic; Cadmium and Lead which are known to the State Of California to cause cancer; birth defects and other reproductive harm. For more information go to www.P65Warnings.ca.gov

FEATURES:
  • Made From High-Quality T-304 Austenitic Stainless Steel
  • Mandrel Bent Pipes
  • Ensures Consistent Diameter Through Each Curve
  • Mufflers Have No Baffles/Chambers
  • Produces High Velocity
  • Million Mile Warranty

A Borla "Axle Back" or rear section exhaust implies the exhaust system is located behind the vehicle rear axle . Most installations are completed in less than an hour and require no cutting of the factory system. A Borla Axle Back performance exhaust is a less restrictive aftermarket exhaust system that will improve the sound level both inside the cabin and exterior. Borla Axle Back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year/make/model vehicle.

BORLA(R) PERFORMANCE INDUSTRIES is the pioneer and leader in the design and manufacture of premiumT-304 austenitic stainless steel performance exhaust. We began over four decades ago as a manufacturer of exhaust systems for such "concours classics" as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today's performance vehicles for the street, off-road, and racing.

Specifications


Manufacturer's Part Number 11751
CARB Approved Yes

Reviews


Please sign in or sign up to leave a review for this product.

Questions


Please sign in or sign up to ask a question about this product.

Vehicle Fitment


YearMakeModelTrimEngineNotes
 
 
 
 
 
 
2005FordMustangBase Convertible 2-Door4.0L 245Cu. In. V6 GAS SOHC Naturally Aspirated
2005FordMustangBase Coupe 2-Door4.0L 245Cu. In. V6 GAS SOHC Naturally Aspirated
2006FordMustangBase Coupe 2-Door4.0L 245Cu. In. V6 GAS SOHC Naturally Aspirated
2006FordMustangBase Convertible 2-Door4.0L 245Cu. In. V6 GAS SOHC Naturally Aspirated
2007FordMustangBase Coupe 2-Door4.0L 245Cu. In. V6 GAS SOHC Naturally Aspirated
2007FordMustangBase Convertible 2-Door4.0L 245Cu. In. V6 GAS SOHC Naturally Aspirated
2008FordMustangBase Convertible 2-Door4.0L 245Cu. In. V6 GAS SOHC Naturally Aspirated
2008FordMustangBase Coupe 2-Door4.0L 245Cu. In. V6 GAS SOHC Naturally Aspirated
2009FordMustangBase Coupe 2-Door4.0L 245Cu. In. V6 GAS SOHC Naturally Aspirated
2009FordMustangBase Convertible 2-Door4.0L 245Cu. In. V6 GAS SOHC Naturally Aspirated