Valve Spring

Elite Race Dual Valve Spring

Elite Race Dual Valve Spring; Drag Race/Oval Track; 1.549 in. OD w/Damper; 0.719 in. ID; .700-.800 in. Max Lift; 16 pc.;

• Camshaft Type: Roller
• Coil Bind Height (in.): OEM
• Inside Diameter: 0.719
• Installed Height (in.): 2.05
• Installed Pressure (lbs.): 228
• Open Height (in.): 1.3
• Open Pressure (lbs.): 636
• Outside Diameter: 1.549
• Position: N/A
• Spring Rate (lbs./in.): 494
• Spring Type: Double

• Made From Super Clean Wire
• CNC Machined
• Pre-Set For Initial Load Loss
• 1 Year Limited Warranty

Elite Race(TM) Double Valve Springs from COMP Cams(R) have a .750?+ maximum lift and outside diameter of 1.680?. Engineered with enhanced processing for middle level fatigue resistance and designed to work with roller cams, they are widely used in Dirt or Asphalt Late Model and Sportsman racing, as well as marine racing. These Elite Race(TM) Valve Springs will also work in some high end flat tappet applications

COMP Cams manufactures truly superior hydraulic and solid flat tappet, hyd and mechanical roller, and overhead camshafts for everything from OE replacement to full race, designed and manufactured using cutting-edge technology and the finest engineering in the industry. Whether your engine is naturally aspirated, or you run nitrous, or a supercharger or turbo, our cams make more horsepower than any other. Looking for that ultimate hard-hitting muscle car idle? Check out our aggressive new Thumpr Cams. Match our camshafts up with our competition-grade lifters, valve springs, timing sets, and other supporting components, and you'll experience the ultimate in race-winning reliability!