Protect your 2024-2026 Toyota Tacoma i-FORCE, 2025-2026 Toyota 4Runner i-FORCE, 2024-2026 Lexus GX550 or 2021-2026 Toyota Tundra i-FORCE with RIVAL Skid Plates from the world's leading skid plate manufacturer, precision engineered for exceptional strength without unnecessary weight.The high-quality RIVAL skid plates are made from deep-stamped 1/4-inch thick aluminum alloy with no welded seams. This durable underbody armor offers both a lightweight and high strength solution for underbody protection. Combined with a no drill installation, it's an easy choice to protect the underbody of your vehicle from rocks, logs and scrapes. Being an extremely corrosion resistant material, aluminum will not rust even if the powder coat becomes gouged or scratched, and it keeps every inch of ground clearance without adding unnecessary load.Only 32 lb. No drilling required. 1/4-in. aluminum alloy. Rust-proof. Cat theft protection. Deep stamped technology. Matte metallic silver powder coat.Applications: 2024-2026 Toyota Tacoma (i-FORCE); 2025-2026 Toyota 4Runner (i-FORCE); 2024-2026 Lexus GX550 (i-FORCE); 2021-2026 Toyota Tundra CrewMax (i-FORCE).What's in the box: skid plate, mounting hardware, installation manual.i-FORCE Gas Engine Only: This skid plate is for i-FORCE (gas engine) applications only. It does not fit i-FORCE MAX (hybrid). Does not fit Hybrid - look for other part number: 2333.9569.3.6TRD Front Skid Plate Compatibility: This skid plate can be installed with the TRD engine plate if you use longer M8x1.25 bolts in the rear of the TRD skid plate with at least 7mm tall spacers, or washers stacked the equivalent size.Transmission: Compatible with both manual and automatic transmission.Lexus GX550 Owners: This RIVAL 1/4-inch thick stamped aluminum catalytic converter skid plate is a great choice to protect your catalytic converter from theft. Please note that it cannot be installed with the factory Lexus engine cover - it was designed to work with the RIVAL 1/4-inch thick stamped aluminum engine skid plate for maximum protection.Tap Recommendation: It's good practice to use a tap on all included hardware and bracketry, or run the bolts into the nut plates a few times before installation to ensure ease of final assembly.

Manufacturer's Part Number	2333.9567.4.6
CARB Approved	Yes