Carburetor

Performer Series Carburetor

Performer Series Carburetor; 4 bbl; 750cfm; Square Flange 4150; Manual Choke; Single Fuel Inlet Capability; Gasoline; Mechanical Secondary w/Velocity Air Valve;

• Barrel: Four
• CFM: 750
• Choke: Manual
• Emission: Without EGR
• Finish: Anodized
• Flange: Square Bore
• Type: Automotive
• Usage: Street/Hi-Performance
• WARNING CA Proposition 65: Yes
• WARNING CA Proposition 65 Message: WARNING: This product can expose you to Zinc; which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information; visit www.P65warnings.ca.gov.

• Bolts On And Runs Right Out of The Box
• Dependable Street Performance/Smooth Throttle Response
• Factory Set Float Levels; Adjustments Are Rarely Needed
• 2-Piece Design Means No Gaskets Below The Fuel Level
• Installation And Tuning DVD Included With Every New Carb
• Change Jets/Adjust Floats/Replace Needles-Seats w/o Fuel Drain
• Designed/Calibrated For Optimum Street Performance
• Match With A Variety of Manifolds
• Incl. Both Timed And Fu

The Edelbrock 14073 Performer Series 750 CFM manual choke black powder coated carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 14073 Performer Series 750 CFM manual choke black powder coated carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to hold a tune, so once it is tuned, the carburetor stay's tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor thats reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation. (CALIBRATED FOR PERFORMANCE) Designed and calibrated for optimum street performance in small-block and big-block engines with Performer RPM, RPM Air-Gap and Torker II manifolds and with Performer manifolds on large cubic-inch engines. Includes both timed and full vacuum ports for ignition advance. Electric choke #1478 can be added if needed. Comes with: Metering Jets - Primary .113, Secondary .107; Metering Rods - .071 x .047; Step-Up Spring - orange (5 Hg). Use Carb Studs #8008 or #8024 if needed.

When you design and sell the best-engineered performance products in the world, you have to have a rigorous testing program. Why? Without adequate testing, there's no way to stand behind your product with confidence. That's why every product we design and sell at Edelbrock is tested and approved by Edelbrock engineers in a real world environment on state-of-the-art equipment. Our three Super Flow computerized engine dynos are capable of measuring 11 separate engine variables up to speeds of 12,000 rpm. For 2007, we added a new Super Flow SF902 engine dyno. It's fully automated and programmable to simulate various driving situations, and is equipped with WinDyn software for the very latest in testing equipment. For real-world tuning, there's our Super Flow model SF-840 eddy-current chassis dyno that can handle up to 1,000 hp at the wheels and speeds of 200 mph. When all testing is completed, the results evaluated, and the part has passed all performance criteria, then, and only then, is the product deemed ready for production. These precise testing procedures are applied to the entire Edelbrock line for performance that's guaranteed. Edelbrock test vehicles are driven by Edelbrock engineers and employees to get a "real world" feeling for the performance improvements. Our products are also tested and used by professional race car teams and drivers. Working with these talented individuals is just another extension of our research and development process so when we say "proven performance" we really mean it! Top racing teams in all forms of motorsports rely on Edelbrock to produce parts that they can count on to win races and championships. Further underscoring our commitment to the racing community, Edelbrock is the only aftermarket intake manifold manufacturer licensed by NASCAR.