Heat Shrink Sleeve

Hi-Temp 3:1 Shrink Tubing

Hi-Temp 3:1 Shrink Tubing; 9mm x 4 ft.; Black;

• WARNING CA Proposition 65: Yes
• WARNING CA Proposition 65 Message: WARNING: This product contains a chemical known to the state of California to cause cancer and or/ Birth defects or other reproductive harm. WWW.P65warnings.ca.gov

• Use To Insulate Wires/Connections/Terminals/Wire Splitting
• 3:1 Shrink Ratio
• Operating Temp Range -67 F To 275 F
• Thick Wall Construction And Remains Flexible
• Max Operating Temp: 394 F For Short Duration
• Easy To Install: Apply At 120 To 180 F Using Heat Gun
• Offers Clean Professional Look
• Meets MIL Spec DTL-23053/5C
• Flame Retardant
• Alternate To Plastic Ties And Tape

Perfect for sealing spark plug wires to boots at each end forming a water-tight weatherproof seal. With a 3 to 1 shrink ratio, shrink tubes can be used to bundle wires as an alternative to tape or plastic ties.

Design Engineering, Inc.(TM) is one of the foremost suppliers of thermal tuning product featuring products for racers, street performance enthusiasts, and hobbyists alike. In addition to supplying the performance aftermarket with thermal tuning products, Design Engineering serves the needs of the powersports, marine, industrial and commercial industry markets the world over.