Exhaust System Kit

MACH Force-Xp Header Loop And Y-Pipe Performance Package

MACH Force-Xp Header Loop And Y-Pipe Performance Package; 2 in. To 2 1/2 in. Tubing; Incl. Y-Pipe w/Merge Collector/Loop Relocation Pipe/Clamps/Hardware;

• Exhaust Type: Dual
• Exit Position: Single
• Inlet Inside Diameter: 2.000 in.
• Material: Stainless Steel
• Tail Pipe Material: Stainless Steel
• Tubing Diameter: 2.000 in.
• WARNING CA Proposition 65: Yes
• WARNING CA Proposition 65 Message: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

• Accommodates Most Long-Arm Travel Lift Kits
• Includes Y-Pipe and Loop Relocation Pipe
• 2 in. and 2.5 in. Mandrel Bent 409 Stainless Steel
• Merge Collector Design
• 100% Hand MIG-Welded
• High Quality Hardware and Clamps

Lifting your 2012-2018 Jeep Wrangler JK or Wrangler Unlimited with the V6-3.6L engine can create clearance problems between your suspension and factory exhaust. aFe's Twisted Steel Y-pipe with loop relocation exhaust pipe solves this problem by improving clearance during extended suspension travel for worry-free off-roading. This combo system is constructed with 2" to 2 1/2" mandrel bent, 409 stainless steel tubing for greater exhaust flow and longevity. 100% hand MIG-welded by certified craftsmen for proven durability, the y-pipe incorporates a merged collector design to create a smooth transition to eliminate dead zones and improve flow. The loop relocation pipe will not compromise performance gains or exhaust sound. All hardware and clamps are included for a hassle-free installation. Cutting is required to remove factory loop. Accommodates Aftermarket Long-Arm Lift Kits: Want long-travel suspension on your Jeep? Prevent contact between your driveshaft/control arm and factory exhaust during extended suspension travel with aFe's Twisted Steel package. aFe's Y-pipe is designed to provide optimum clearance between the driveshaft and exhaust while the loop relocation pipe offers clearance between the drivers-side exhaust and long-arm travel lift kits. Y-Pipe With Merge Collector: The merge collector is designed to create a smooth transition of exhaust gases as the two tubes are combined into one. This design increases exhaust velocity and eliminates the possibility of any turbulence that stamp-formed collectors can cause. Mandrel Bent Tubing: Mandrel-bent tubing allows for smooth transitions of exhaust gas increasing exhaust velocity, increasing horsepower, torque and improving throttle response. Installation is a Snap: Includes all necessary hardware and uses factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality band clamps and hardware are used for a complete 360-degree sealing surface.

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUV's. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.